Explanation of Controllogic data and registers/values for the Charging/balancing process flow

Troubleshooting
1

@Batrium,

When troubleshooting my system, I study the Batrium wiki, but I get a bit confused for all settings. I guess due to all modifications and updates, some naming have slightly changed.

Is it possible to update the graph “simplified cell charge balancing rules” (Charging Settings | Batrium Knowledge / Wiki) with the registers as used in the several controllogic screens of the bartium software where all settings are set?
For example (if I am correct), “Cell colt above Cutout” = CV10.

Can you also give an explanation of the binary data of Controllogix when a QuickLog Extract (Tools Menu) is made?

John

2

Hi John,

Sorry for the late reply, hope I can help explain this for you.

First, have a read of this companion article:

We will be updating the charge control page with CV14, that’s pretty much the only change that has come along since.

CV10 is definitely still present, It’s under Menu > Control Logic > Charging tab

3

James,

Thanks for the info. I did not see this info in the pages. I will study and come back when there are more questions.

JOhn

1 Like